Author |
Topic: Glass Half Full (Read 15634 times) |
|
sov
Newbie
Posts: 6
|
 |
Glass Half Full
« on: Nov 3rd, 2006, 4:22pm » |
 Quote  Modify
|
The best way to gauge the fullness of the glass is to use your hand to seal the opening of the glass, then turn the glass sideways and lay it on any flat surface, such as the floor. The perfect circle of the cylinder creates a perfect measuring tool.
|
|
 IP Logged |
|
|
|
Icarus
wu::riddles Moderator
Uberpuzzler
Boldly going where even angels fear to tread.
Gender: 
Posts: 4863
|
|
Re: Glass Half Full
« Reply #1 on: Nov 3rd, 2006, 7:48pm » |
Quote Modify
|
But your hand is not flat, so it adds a bit of volume on one side of your cylinder. If the water was halfway up with the cylinder on its side like that, you could be sure that in fact the cylinder is more than half full. Where the water level must fall to be exactly half full is still a guess.
There is another approach that is more accurate.
|
|
IP Logged |
"Pi goes on and on and on ...
And e is just as cursed.
I wonder: Which is larger
When their digits are reversed? " - Anonymous
|
|
|
danny.paulsen
Newbie
Posts: 1
|
|
Re: Glass Half Full
« Reply #2 on: Nov 8th, 2006, 10:55pm » |
Quote Modify
|
the best way to accurately guage the amount of water is to tilt the cylinder glass to the side till the edge of the water is exactly at the open rim's edge. If the water intersects the corner of the bottom of the glass, then you have a glass half full/ if the the water is above the bottom rim, its more than half full, below-less than half full
|
|
IP Logged |
|
|
|
housewifeman
Newbie
Posts: 2
|
|
Re: Glass Half Full
« Reply #3 on: Dec 29th, 2006, 12:08pm » |
Quote Modify
|
Excellent. One could also use a piece of clothing such as a shoe string. Place one end at the bottom of the glass. Hold the middle at the level of the water. Then raise the part below water level. If the string reaches the top exactly then the glass is half full. I it goes above it is more than half full and if it doesn't reach the top it is less than half full. It didn't say you are naked!
|
|
IP Logged |
|
|
|
fiziwig
Junior Member
Posts: 78
|
|
Re: Glass Half Full
« Reply #4 on: Dec 29th, 2006, 8:46pm » |
Quote Modify
|
Measuring the depth won't due i the glass is tapered as most glasses are.
Of course to an engineer, the glass is neither half full nor half empty. It's simply that the glass is twice as big as it needs to be.
|
|
IP Logged |
|
|
|
rmsgrey
Uberpuzzler
    
Gender:
Posts: 2873
|
|
Re: Glass Half Full
« Reply #5 on: Dec 30th, 2006, 10:42am » |
Quote Modify
|
on Dec 29th, 2006, 8:46pm, fiziwig wrote:| Of course to an engineer, the glass is neither half full nor half empty. It's simply that the glass is twice as big as it needs to be. |
|
Not necessarily - what level of perturbations are anticipated, and what design tolerances are required?
If a glass is filled to the brim, then it requires an inconvenient degree of care to drink from it without spilling. A factor of two may be overkill, but I'd prefer a moderately oversized glass to having fluid sloshed down my front...
|
|
IP Logged |
|
|
|
ChemEngineer
Newbie
Posts: 1
|
|
Re: Glass Half Full
« Reply #6 on: Jan 26th, 2007, 9:23am » |
Quote Modify
|
A quick and dirty way to solve this is to cover the top of the glass, hold your finger outside the glass at the top of the current water level, and then flip upside down (keeping your finger in place). If the new water level is; below your finger then the glass is less than half full, above your finger then the glass is more than half full, and of course at your finger then it is exactly half full.
|
|
IP Logged |
|
|
|
fiziwig
Junior Member
Posts: 78
|
|
Re: Glass Half Full
« Reply #7 on: Jan 27th, 2007, 9:27am » |
Quote Modify
|
on Jan 26th, 2007, 9:23am, ChemEngineer wrote:| A quick and dirty way to solve this is to cover the top of the glass, hold your finger outside the glass at the top of the current water level, .... |
|
Good solution. But again, it assumes that the glass is cylindrical rather than tapered. However, a tapered glass could use nearly the same technique:
Cover the top of the glass. Hold the glass on its side with the bottom-to-rim axis horizontal, mark the water level on the two diametrically opposed sides of the glass, and then rotate the glass about the bottom-to-rim axis until the marks have been rotated to the opposite side. If both marks still line up with the water level then the glass is half full.
If both marks are above the water level the glass is less than half full, and if both marks are below water level the glass is more than half full.
This also works with glasses that have irregular vertical cross sections such as the old fashioned soda fountain Coke glass, or even the traditional green glass wasp-waist Coke bottle.
|
|
IP Logged |
|
|
|
towr
wu::riddles Moderator
Uberpuzzler
Some people are average, some are just mean.
Gender:
Posts: 13730
|
|
Re: Glass Half Full
« Reply #8 on: Jan 28th, 2007, 7:15am » |
Quote Modify
|
on Jan 27th, 2007, 9:27am, fiziwig wrote:| Good solution. But again, it assumes that the glass is cylindrical rather than tapered. |
|
I don't think it does, I think it works for almost any shape glass, as long as the water has only one level when turned either way (i.e. it isn't caught in other 'pockets')
In that case you will have one dividing plane with a half above it and below it, and a mark where that plane cuts the glass provides adequate proof.
Quote:However, a tapered glass could use nearly the same technique:
<snip> |
|
It only works for rotationally symmetric glasses though. Which admittedly includes most, but still.
|
|
IP Logged |
Wikipedia, Google, Mathworld, Integer sequence DB
|
|
|
fiziwig
Junior Member
Posts: 78
|
|
Re: Glass Half Full
« Reply #9 on: Jan 28th, 2007, 9:07am » |
Quote Modify
|
on Jan 28th, 2007, 7:15am, towr wrote:
In that case you will have one dividing plane with a half above it and below it, and a mark where that plane cuts the glass provides adequate proof.
|
|
AHA! I see what you mean. I stand corrected.
|
|
IP Logged |
|
|
|
CowsRUs
Full Member
Why is it that cats are better then cows? Why not?
Gender:
Posts: 175
|
|
Re: Glass Half Full
« Reply #10 on: Feb 6th, 2007, 5:45pm » |
Quote Modify
|
Easy our the water out... then its less than half full/empty. 
|
|
IP Logged |
"It is very good to have a brother who has a cow. It is also good to have a brother who has two cows. In fact, a brother with a cow is great, except when he has exactly 135 cows and is one of thecow himself."-Unknown
|
|
|
Greg
Newbie
Posts: 2
|
|
Re: Glass Half Full
« Reply #11 on: Mar 1st, 2007, 1:39am » |
Quote Modify
|
Suppose the water in the glass was chilled, and that the floor of the room is flat.
The glass of the cup that was surrounding the water will form a layer of condensation, so place the cup on the level ground to form a nice, even condensated surface area (you can smear away any formed condesation in the process of placing if you really wanna be pickey, but I don't think you can for the next step, unfortunately). Using centrifugal force, spin the glass upside down without spilling any water and place the cup open-side down on the ground. It will then be much more clear whether the glass is more or less than half full by the difference between the new water level and the line formed from the condensated surface area and non-condensated surface area of the glass.
Note that the ground doesnt actually have to be perfectly perpendicular to the force of gravity. One must simply rotate the glass after placing it upside down on the ground so that the distance between the condensation line and new water level is about equal at all points around either line (the new water level or the condensation line).
|
|
IP Logged |
|
|
|
chad1
Newbie
Gender:
Posts: 15
|
|
Re: Glass Half Full
« Reply #12 on: Apr 6th, 2007, 8:00pm » |
Quote Modify
|
this is simple. you walk out of the room. Then you mark the top and the bottom of the glass with something outside of the room. Then you measure the glass with a ruler found outside the room. It never says you cannot walk outside the room.
|
|
IP Logged |
|
|
|
Pyotr
Newbie
Posts: 13
|
|
Re: Glass Half Full
« Reply #13 on: Apr 18th, 2007, 12:32pm » |
Quote Modify
|
The glass is a cylinder. Just tilt it until the water reaches the lip.
If the level at the base is above the bottom rim, it is more than half full, and vise versa.
Edit: just read WW's request for thinking patterns and not just answers.
In my mind's eye, I just thought of a glass half full and tried to pour it out. When it began to pour, the water level was touching both the lip and the base as it was a right cylinder.
The rest follows.
Very much enjoy your site. The easy level is hard enough for me, although I had a great time with the Sangaku problems at the medium level. I have some overseas Japanese students here in Russia and they find it fascinating to discover that their country had its own mathematical evolution while being cut off from the outside.
Of course, this is not the whole story, but at least it draws them in to the arena of problem solving.
All the best!
|
| « Last Edit: Apr 18th, 2007, 12:57pm by Pyotr » |
IP Logged |
|
|
|
tedwindsor
Newbie
Posts: 5
|
|
Re: Glass Half Full
« Reply #14 on: Apr 29th, 2007, 11:19am » |
Quote Modify
|
Assuming the walls in this empty room are well constructed... being flat, and at a 90 degree angle to eachother and the earth...
Take the glass to the corner of the room, place it open side up against one wall and the side against the adjacent wall... if the water level is above where the glass meets the wall, it's more than half full, below and it's less...
|
|
IP Logged |
|
|
|
Zatanna
Newbie
Posts: 18
|
|
Re: Glass Half Full
« Reply #15 on: Aug 11th, 2007, 5:37pm » |
Quote Modify
|
Here's the answer to a related qusetion:
"Is the glass half-empty, or half-full?"
It depends on whether you're FILLING the glass or EMPTYING it. 
|
|
IP Logged |
|
|
|
cowboy1
Newbie
Posts: 1
|
|
Re: Glass Half Full
« Reply #16 on: Sep 6th, 2007, 5:15pm » |
Quote Modify
|
SUMMARY: Tilt the glass!
EXPLANATION:
Simplify the problem to two dimensional geometry. Think of the glass as a rectangle and the water as a shape inside of the rectangle.
We know that if we draw a line from one corner of the rectangle to the opposite corner, the rectangle will be split into two equal-sized triangles.
The two triangles are the point, where the glass is exactly half full. If one of the triangle shapes were larger or smaller, we'd know which of the other conditions apply.
Conveniently, such a dividing line can be drawn by tilting the glass to line up the water surface with the top of the glass and bottom of the glass.
If the water surface touches both corners at the same time, it is half full. If water is spilled attempting to tilt the glass enough, it is more then half full. If the water falls short to touch both 'corners', it is less then half full.
Note: The approach would not work, if the glass wasn't symmetric and had right angles.
|
|
IP Logged |
|
|
|
Goomba_5
Newbie
Posts: 1
|
|
Re: Glass Half Full
« Reply #17 on: Nov 6th, 2007, 1:35am » |
Quote Modify
|
on Dec 29th, 2006, 12:08pm, housewifeman wrote:| It didn't say you are naked! |
|
True. But the shoes I'm wearing don't have shoelaces...
|
|
IP Logged |
|
|
|
Dan
Newbie
Posts: 2
|
|
Re: Glass Half Full
« Reply #18 on: Nov 19th, 2007, 12:01am » |
Quote Modify
|
Ok so here it goes.
Don't think about what kind of stuff to measure the water with, tilting it or flipping it upside down or against the wall or using a shoe lace or going "outside of the room" or how to find the half way mark.
Try to think about how much water you have and how much water the glass can hold and go from there, meaning find the volume of the glass and the water in it.
So lets see what we have to use, an empty room, a clear right cylinder glass, no measuring or writing utensils, so obviously we can't measure it in any conventional way or in any way at all except for making estimates.
Also, you could think like a child and simply give an answer that way. And the riddle is only looking for the most accurate way to figure out if its half full or more or less.
And so the most accurate way would be to measure it to see if its more than half full, less than half full, or half full. So you don't actually half to measure it to figure it out, you only have to know how to figure it out.
|
|
IP Logged |
|
|
|
Csimbi
Newbie
Posts: 1
|
|
Re: Glass Half Full
« Reply #19 on: Apr 8th, 2012, 9:19pm » |
Quote Modify
|
The answer is easy: the glass is full.
Some water, some air, but definitely full.
|
|
IP Logged |
|
|
|
|
RIDDLES SITE
WRITE MATH!
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print