Author |
Topic: Beer cans (Read 12094 times) |
|
jojo
Guest
|
Why are beer cans tapered on the ends?
|
|
 IP Logged |
|
|
|
Sir Col
Uberpuzzler
impudens simia et macrologus profundus fabulae
Gender: 
Posts: 1825
|
 |
Re: Beer cans
« Reply #1 on: Nov 1st, 2003, 4:29am » |
 Quote  Modify
|
I guess that part of the reason is, so that they will stack?
|
|
IP Logged |
mathschallenge.net / projecteuler.net
|
|
|
towr
wu::riddles Moderator
Uberpuzzler
Some people are average, some are just mean.
Gender:
Posts: 13730
|
|
Re: Beer cans
« Reply #2 on: Nov 1st, 2003, 10:01am » |
Quote Modify
|
Added strength perhaps..
Maybe esthetics.
It makes the can look bigger for the same volume..
|
|
IP Logged |
Wikipedia, Google, Mathworld, Integer sequence DB
|
|
|
maryl
Guest
|
Could be it has something to do with the machinery they use to make them.
|
|
IP Logged |
|
|
|
James Fingas
Uberpuzzler
Gender:
Posts: 949
|
|
Re: Beer cans
« Reply #4 on: Nov 17th, 2003, 1:34pm » |
Quote Modify
|
Sir Col:
Quote:
Yes, but soup cans stack too, and they're only tapered at the bottom.
towr:
Quote:Added strength perhaps..
Maybe esthetics. |
|
Don't see why it would add strength, and aesthetics (although possibly true) is not a satisfying answer...
Maryl:
Quote:| Could be it has something to do with the machinery they use to make them. |
|
The machinery is designed to make them tapered at both ends. But I'll bet you it's harder to make pop cans tapered than it would be otherwise.
It could be due to materials cost: the aluminum for the top of a can is significantly more expensive than the plate steel for the sides. Of course you need some aluminum to put the spout and tab on.
|
|
IP Logged |
Doc, I'm addicted to advice! What should I do?
|
|
|
visitor
Guest
|
Having worked at one time in a Pepsi bottling plant, I'm pretty sure the reason is strength (although I don't know the physics of it). The difference between pop and vegetables (which are canned in straight sided cans) is the pressure inside. Hopefully it won't be too great at the moment you pop the top, but shake the cans up inside a hot semi for a few hours and the pressure gets pretty high. That's also why they have concave bottoms, and how it happens that you sometimes get a can with the bottom bulging out; think of the pressure it takes to do that.
Pop is canned cold (to avoid a lot of foaming and carbonation loss. But then it must be warmed or moisture will condense on the cans and ruin the cardboard cartons. When the production line sometimes gets shut down for a while and cans stay in the warmer too long, they start exploding at any little jostle when the line starts up. I've seen cans explode in a guy's hand as he was taking hot cans off the line. (no injuries fortunately, but you do get soaked).
I assume sharp, square corners could not handle the pressure as well.
|
|
IP Logged |
|
|
|
towr
wu::riddles Moderator
Uberpuzzler
Some people are average, some are just mean.
Gender:
Posts: 13730
|
|
Re: Beer cans
« Reply #6 on: Nov 17th, 2003, 2:33pm » |
Quote Modify
|
on Nov 17th, 2003, 1:34pm, James Fingas wrote:towr:
Don't see why it would add strength, |
|
The rounder a body the better it withstands inside (or outside) pressure..
A sphere, however, isn't practical. To stack them, and place them on a table without having them role off, they need to be relatively flat at top and bottom. So tapering the ends of the cylinder-like can gives the best overall result..
|
|
IP Logged |
Wikipedia, Google, Mathworld, Integer sequence DB
|
|
|
hemorraged
Guest
|
i don't drink beer, but the reason the cans are tapered at both ends is
so that they can make the cans look bigger but put less drink in them.
we live in a capatalist world, eh?
|
|
IP Logged |
|
|
|
John_Gaughan
Uberpuzzler
Behold, the power of cheese!
    
Gender:
Posts: 767
|
|
Re: Beer cans
« Reply #8 on: Sep 10th, 2004, 1:33pm » |
Quote Modify
|
on Sep 10th, 2004, 10:12am, hemorraged wrote:i don't drink beer, but the reason the cans are tapered at both ends is
so that they can make the cans look bigger but put less drink in them. |
|
That explains why they are sold by liquid volume, not can size 
As was explained previously, the reason is that tapered cans resist the pressure inside (and out) better. Different shapes deal with pressure differently. Rounded structures, such as spheres and tapered cans, hold liquid pressure better. Triangles are great for resisting shearing in buildings and construction equipment.
This is also why submarines are shaped somewhat like bullets. That round shape resists water pressure very well.
|
|
IP Logged |
x = (0x2B | ~0x2B)
x == the_question
|
|
|
cherry12345
Newbie
Posts: 1
|
|
Re: Beer cans
« Reply #9 on: Dec 3rd, 2007, 4:45pm » |
Quote Modify
|
because having them tapered allows company to save cost from raw material (aluminum..whatever they are using).
|
|
IP Logged |
|
|
|
webtasarim
Newbie
Gender:
Posts: 47
|
|
Re: Beer cans
« Reply #10 on: Oct 6th, 2013, 4:42pm » |
Quote Modify
|
eay to drink ?
|
|
IP Logged |
|
|
|
mejohnreeves
Newbie
Gender:
Posts: 7
|
|
Re: Beer cans
« Reply #11 on: Oct 25th, 2013, 7:17am » |
Quote Modify
|
I think it increase the strength of can. I suggest (irrelevant link removed) in the concern of this thread.
|
| « Last Edit: Oct 25th, 2013, 9:03am by Grimbal » |
IP Logged |
|
|
|
|
RIDDLES SITE
WRITE MATH!
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print
Remove